4", Mechanical Joint x Mechanical Joint, 250 PSI Water/200 PSI Fire Protection, Lead-Free, Manganese Bronze Non-Rising Stem, Cast Iron 2" Open Right Square Operating Nut, Fusion Bonded Epoxy Coated Ductile Iron Body, Resilient Wedge, Full Water Way, Ga...

FTLMHV4757101R MFG #: 4-7571-01R
$0.00 / ea
Stock Product
QTY
  • FEATURES BENEFITS
  • LONG DESCRIPTION
Thrust Bearing - Delrin Thrust Bearings Above and Below the Thrust Collar Reduce Friction and Minimize Operating Torques; Stainless Steel Hardware - 304 Stainless Steel Nuts and Bolts Provide Long-Life Corrosion Protection; Copper Alloy Stem - Long, Trouble Free Life with High Strength, Non-Corrosive Copper Alloy Stem and Stem Nut; 100 Percent Coated Wedge - 100 Percent Coated Wedge Ensures Bubble-Tight Seal Every Time up to 250 PSI with Twin Seal Design; Elliptical Bolt Holes - Hole Design on Mechanical Joint Connection Eliminates the Need for Anti-Rotation Bolts; Replaceable O-Ring - Two O-Ring Seals are Replaceable with the Valve Fully Open and Subjected to Full-Rated Working Pressure; No Flat Gasket - O-Ring Seals at Stuffing Box and Bonnet to Body Flanges to Ensure the Best Possible Seal; Minimal Flow Loss - Smooth, Unobstructed Waterway is Free of Pockets, Cavities and Depressions Allowing for Minimal Flow Loss and Lower Pumping Costs, All Valves Accept Full Size Tapping Cutter; Epoxy Coating - Clow Corrosion Resistant Fusion Bonded Epoxy Coating; Easy Storage - Pads on the Bottom of All Valves Keep Valve in Upright Position for Easier Storage and Protection from the Elements; Lead-Free; Made in USA
Gate Valve; Type Resilient Wedge, Full Water Way; Actuation Type 2 Inch Square Operating Nut-Open Right; Nominal Size 4 Inch; Stem Design Non-Rising; End Connection Mechanical Joint x Mechanical Joint; End to End Distance 9-1/2 Inch; Body Material ASTM A536 5 to 8 Mil AWWA C550 Fusion Bonded Epoxy Coated Ductile Iron; Stem Material ASTM B584 Manganese Bronze; Seal Material NBR Stem O-Ring; Wedge Material EPDM Encapsulated Cast Iron; Bonnet Material ASTM A536 5 to 8 Mil AWWA C550 Fusion Bonded Epoxy Coated Ductile Iron; Handle Material ASTM A126 Cast Iron; Pressure Rating 250 PSI (Water), 200 PSI (Fire Protection); Inclusions/Features Delrin Thrust Bearing, Stainless Steel Hardware, Elliptical Bolt Hole, Replaceable O-Ring; Exclusions Accessory, Flat Gasket; Application Water Supply; Applicable Standard UL, FM, AWWA C515, NSF/ANSI 61G; Lead-Free