2", FPT x FPT, 250 PSI Water, Lead-Free, Manganese Bronze Non-Rising Stem, Cast Iron 2" Square Open Left Operating Nut, Fusion Bonded Epoxy Coated Cast Iron Body, Resilient Wedge, Full Water Way, Gate Valve with 316 Stainless Steel Bolt and Nut

Thrust Bearing - Delrin Thrust Bearings Above and Below the Thrust Collar Reduce Friction and Minimize Operating Torques; Copper Alloy Stem - Long, Trouble-Free Life with High Strength, Non-Corrosive Copper Alloy Stem and Stem Nut; Stainless Steel Hardware - 304 Stainless Steel Nuts and Bolts Provide Long-Life Corrosion Protection; 100 Percent Coated Wedge - Ensures Bubble-Tight Seal Every Time. with Twin Seal Design; Elliptical Bolt Holes - Hole Design on Mechanical Joint Connection Eliminates the Need for Anti-Rotation Bolts; Minimal Flow Loss - Smooth, Unobstructed Waterway is Free of Pockets, Cavities and Depressions, Allowing for Minimal Flow Loss and Lower Pumping Costs All Valves Accept Full-Size Tapping Cutter; Replaceable O-Rings - Two O-Ring Seals are Replaceable with the Valve Fully Open and Subjected to Full-Rated Working Pressure; No Flat Gasket - O-Ring Seals at Stuffing Box and Bonnet to Body Flanges to Ensure the Best Possible Seal No Flat Gaskets; Epoxy Coating - Corrosion Resistant Fusion Bonded Epoxy Coating; Easy Storage - Pads on the Bottom of All Valves Keep Valve in Upright Position for Easier Storage and Protection from the Elements; Lead-Free; Made in USA

Gate Valve; Type Resilient Wedge, Full Water Way; Actuation Type 2 Inch Square Operating Nut-Open Left; Nominal Size 2 Inch; Stem Design Non-Rising; End Connection Female Threaded x Female Threaded; End to End Distance 5-1/4 Inch; Body Material ASTM A126 5 to 8 Mil AWWA C550 Fusion Bonded Epoxy Coated Cast Iron; Stem Material ASTM B584 Manganese Bronze; Seal Material NBR Stem O-Ring; Wedge Material EPDM Encapsulated Cast Iron; Bonnet Material ASTM A126 5 to 8 Mil AWWA C550 Fusion Bonded Epoxy Coated Cast Iron; Handle Material ASTM A126 Cast Iron; Pressure Rating 250 PSI (Water); Inclusions/Features Delrin Thrust Bearing, Stainless Steel Hardware, Elliptical Bolt Hole, Replaceable O-Ring, 316 Stainless Steel Bolt and Nut; Exclusions Flat Gasket; Application Water Supply; Applicable Standard UL, FM, AWWA C509, NSF/ANSI 61G; Lead-Free