8", Mechanical Joint x Mechanical Joint, 350 PSI Working/700 PSI Static, Lead-Free, 304 Stainless Steel Non-Rising Stem, Ductile Iron 2" Open Right Square Wrench Nut, Fusion Bonded Epoxy Coated Ductile Iron Body, Resilient Wedge, Gate Valve without Acc...
FTL8A236223R304STEM MFG #: 08A236223RNT
$0.00 / ea
- FEATURES BENEFITS
- LONG DESCRIPTION
Mueller Resilient Wedge Gate Valves have Features to Make Them Easier to Operate, Preserve Sealing Capability and Interior Coating Integrity; Dual Purpose Lifting Lugs - New Dual Purpose Lifting Lugs Provide Stability for the Valve Box. Accommodates Strap or Hook. Provides Valve Box Alignment, Eliminating Need for Valve Box Adapter; T-Head Bolt Retention - Improved T-Head Bolt Retention Feature Eliminates Need for Anti-Rotation Bolt; Triple O-Ring Seals - Two Above Thrust Collar and One Below, Retain Lubricant in this Critical Area. Top Two are Replaceable with Valve Fully Open and Under Pressure. Fourth O-Ring Serves as Dirt Seal; Two-Anti-Friction Washers with Lubrication - Made of Polymer, One Above and One Below the Thrust Collar, Reduce Operating Torque to Open or Close Valve; Stem - The Threads on the Bronze Stem are ACME Form Threads for Strength and Efficiency. the Stem Thrust Collar is Made Integral with the Stem and is Formed by a Heat Upset Operation; Guide Cap Bearing - Made of Polymer and Snapped Over Rubber Covered Wedge Guides, Provide Bearing Surfaces that Protect Both Wedge and Interior Body Coating from Wear and Aid in Easy Operation Even the Largest Valves Installed Horizontally. Roller, Track and Scraper are Not Needed; Smooth, Oversized Water Way - Full, Round, Unobstructed Flow Way Accommodates Full Size Cutter, Provides Superior Flow Characteristics and Reduces Pumping Costs; Ductile Iron Wedge, Symmetrical and Fully Encapsulated with Molded Rubber, No Exposed Iron; Integral Legs – Stands Upright for Easier Handling and Storage; Lead-Free; Made in USA
Gate Valve; Type Resilient Wedge; Actuation Type 2 Inch Square Wrench Nut-Open Right; Nominal Size 8 Inch; Stem Design Non-Rising; End Connection Mechanical Joint x Mechanical Joint; End to End Distance 12.68 Inch; Body Material ASTM A536 ANSI/AWWA C550 10 Mil Pro-Guard Fusion Bonded Epoxy Coated Ductile Iron; Stem Material 304 Stainless Steel; Seal Material Nitrile Stem O-Ring; Wedge Material SBR Encapsulated Ductile Iron; Bonnet Material ASTM A536 Ductile Iron; Handle Material ASTM A536 Ductile Iron; Temperature Rating 33 to 170 Deg F; Pressure Rating 350 PSI (Working), 700 PSI (Static); Inclusions/Features Triple O-Ring Seal, 316 Stainless Steel Cap Screw/Bonnet Bolt and Nut/Stuffing Bolt and Nut, Acetal Guide Cap Bearing/Anti-Friction Washer; Exclusions Accessory; Application Potable Water; Applicable Standard UL 262, FM 1120/1130, ANSI/AWWA C509/C111, NSF/ANSI 61/372, ISO 9001; Lead-Free