6", Mechanical Joint x Mechanical Joint, 250 PSI Water/200 PSI Fire Protection, Lead-Free, Cast Iron 2" Square Open Left Operating Nut, Fusion Bonded Epoxy Coated Cast Iron Body, Resilient Wedge, Full Water Way, Gate Valve without Accessory

Thrust Bearing - Delrin Thrust Bearings Above and Below the Thrust Collar Reduce Friction and Minimize Operating Torques; Copper Alloy Stem - Long, Trouble-Free Life with High Strength, Non-Corrosive Copper Alloy Stem and Stem Nut; Stainless Steel Hardware - 304 Stainless Steel Nuts and Bolts Provide Long-Life Corrosion Protection; 100 Percent Coated Wedge - Ensures Bubble-Tight Seal Every Time up to 250 PSI. with Twin Seal Design; Elliptical Bolt Holes - Hole Design on Mechanical Joint Connection Eliminates the Need for Anti-Rotation Bolts; Minimal Flow Loss - Smooth, Unobstructed Waterway is Free of Pockets, Cavities and Depressions, Allowing for Minimal Flow Loss and Lower Pumping Costs All Valves Accept Full-Size Tapping Cutter; Replaceable O-Rings - Two O-Ring Seals are Replaceable with the Valve Fully Open and Subjected to Full-Rated Working Pressure; No Flat Gasket - O-Ring Seals at Stuffing Box and Bonnet to Body Flanges to Ensure the Best Possible Seal No Flat Gaskets; Epoxy Coating - Corrosion Resistant Fusion Bonded Epoxy Coating; Easy Storage - Pads on the Bottom of All Valves Keep Valve in Upright Position for Easier Storage and Protection from the Elements; Lead-Free; Made in USA

Gate Valve; Type Resilient Wedge, Full Water Way; Actuation Type 2 Inch Square Operating Nut-Open Left; Nominal Size 6 Inch; End Connection Mechanical Joint x Mechanical Joint; End to End Distance 10-1/2 Inch; Body Material ASTM A126 AWWA C509 Fusion Bonded Epoxy Coated Cast Iron; Seal Material Buna-N Stem Packing; Wedge Material EPDM Encapsulated Ductile Iron; Bonnet Material ASTM A126 AWWA C550 Fusion Bonded Epoxy Coated Cast Iron; Handle Material ASTM A126 Cast Iron; Pressure Rating 250 PSI (Water), 200 PSI (Fire Protection); Inclusions/Features Delrin Thrust Bearing, Stainless Steel Hardware, Elliptical Bolt Hole, Replaceable O-Ring; Exclusions Accessory, Flat Gasket; Application Water Supply; Applicable Standard UL 262, ULC, FM 1120/1130, AWWA C509, NSF/ANSI 61G/372, ISO 9001; Lead-Free