4", Mechanical Joint x Mechanical Joint, 200/250 PSI, Copper Alloy Stem, Fusion Bonded Epoxy Coated Ductile Iron Body, Resilient Wedge, Gate Valve

FTL4F6100GVCL MFG #: 4F6100
$0.00 / ea
Stock Product
Thrust Bearings - Acetal Thrust Bearings Above and Below the Thrust Collar Reduce Friction and Minimize Operating Torque; Copper Alloy Stem - Long, Trouble-Free Life with High- Strength, Non-Corrosive Copper Alloy Stem and Stem Nut; Stainless Steel Hardware - 304 Stainless Steel Nuts and Bolts Provide Long-Life Corrosion Protection; 100 Percent Coated Wedge a Fully Encapsulated Wedge Ensures a Bubble-Tight Seal Every Time, up to Rated Pressure (250 PSI), with its Twin Seal Design; Elliptical Bolt Holes Hole Design on MJ Connection Eliminates the Need for Anti-Rotation Bolts; Minimal Flow Loss - A Smooth, Unobstructed Waterway, which is Free of Pockets, Cavities and Depressions, Allows for Minimal Flow Loss and Lower Pumping Costs. All Valves Accept a Full-Size Tapping Cutter; Easy Storage - Pads on the Bottom of All Valves Keep the Valve in an Upright Position for Easier Storage and Protection from the Elements; Replaceable O-Rings - Upper O-Rings are Replaceable with the Valve Fully Open and Subjected to Full-Rated Working Pressure; No Flat Gaskets - O-Ring Seals at the Stuffing Box and at the Bonnet to Body Flange Ensure the Best Possible Seal; Epoxy Coating - Corrosion Resistant Fusion-Bonded Epoxy Coating, Conforming to AWWA C550 and Certified by NSF 61, Protects Both the Interior and the Exterior of the Valve; Made in USA
Gate Valve; Type Resilient Wedge; Nominal Size 4 Inch; End Connection Mechanical Joint x Mechanical Joint; Body Material Fusion Bonded Epoxy Coated Ductile Iron; Stem Material Copper Alloy; Seal Material EPDM; Wedge Material Ductile Iron/Rubber; Bonnet Material Fusion Bonded Epoxy Coated Ductile Iron; Pressure Rating 200/250 PSI; Application Water Supply Service, Raw Sewage, Sludge; Applicable Standard UL, FM, AWWA C509/C550, NSF 61; Number of Turns to Full Open 13-1/2; Opening Direction Left