6", Mechanical Joint x Flanged, 250 PSI Water/200 PSI Fire Protection, Lead-Free, Bronze Non-Rising Stem, Grey Iron 2" Square Open Left Operating Nut, Fusion Bonded Epoxy Coated Ductile Iron Body, Resilient Wedge, Full Water Way, Tapping, Gate Valve wi...

FTL67950TVKE MFG #: 06-7950
$0.00 / ea
Stock Product
  • Actuation Type: 2 Inch Square Operating Nut-Open Left
  • Applicable Standard: UL 262, ULC, FM 1120/1130, AWWA C515, NSF/ANSI 61G/372, ISO 9001
  • Application: Water Supply
  • Body Material: ASTM A536 AWWA C550 Fusion Bonded Epoxy Coated Ductile Iron
  • Bonnet Material: ASTM A536 AWWA C550 Fusion Bonded Epoxy Coated Ductile Iron
  • Brand: KENNEDY VALVE
  • End Connection: Mechanical Joint x Flanged
  • End to End Distance: 10-1/2 Inch
  • Exclusions: Accessory, Flat Gasket
  • Handle Material: ASTM A126 Grey Iron
  • Inclusions/Features: Delrin Thrust Bearing, Stainless Steel Hardware, Elliptical Bolt Hole, Replaceable O-Ring
  • Nominal Size: 6 Inch
  • Pressure Rating: 250 PSI (Water), 200 PSI (Fire Protection)
  • Product Type: Gate Valve
  • Seal Material: ASTM D2000 Stem O-Ring
  • Stem Design: Non-Rising
  • Stem Material: ASTM B584 C86700 Bronze
  • Type: Resilient Wedge, Full Water Way, Tapping
  • Wedge Material: EPDM Encapsulated Ductile Iron
QTY
  • FEATURES BENEFITS
  • LONG DESCRIPTION
Thrust Bearing - Delrin Thrust Bearings Above and Below the Thrust Collar Reduce Friction and Minimize Operating Torques; Stainless Steel Hardware - 304 Stainless Steel Nuts and Bolts Provide Long-Life Corrosion Protection; Copper Alloy Stem - Long, Trouble Free Life with High Strength, Non-Corrosive Copper Alloy Stem and Stem Nut; 100 Percent Coated Wedge - 100 Percent Coated Wedge Ensures Bubble-Tight Seal Every Time up to 250 PSI with Twin Seal Design; Elliptical Bolt Holes - Hole Design on Mechanical Joint Connection Eliminates the Need for Anti-Rotation Bolts; Easy Storage - Pads on the Bottom of All Valves Keep Valve in Upright Position for Easier Storage and Protection from the Elements; Replaceable O-Ring - Two O-Ring Seals are Replaceable with the Valve Fully Open and Subjected to Full-Rated Working Pressure; No Flat Gasket - O-Ring Seals at Stuffing Box and Bonnet to Body Flanges to Ensure the Best Possible Seal; Minimal Flow Loss - Smooth, Unobstructed Waterway is Free of Pockets, Cavities and Depressions Allowing for Minimal Flow Loss and Lower Pumping Costs, All Valves Accept Full Size Tapping Cutter; Epoxy Coating - Clow Corrosion Resistant Fusion Bonded Epoxy Coating; Lead-Free; Made in USA
Gate Valve; Type Resilient Wedge, Full Water Way, Tapping; Actuation Type 2 Inch Square Operating Nut-Open Left; Nominal Size 6 Inch; Stem Design Non-Rising; End Connection Mechanical Joint x Flanged; End to End Distance 10-1/2 Inch; Body Material ASTM A536 AWWA C550 Fusion Bonded Epoxy Coated Ductile Iron; Stem Material ASTM B584 C86700 Bronze; Seal Material ASTM D2000 Stem O-Ring; Wedge Material EPDM Encapsulated Ductile Iron; Bonnet Material ASTM A536 AWWA C550 Fusion Bonded Epoxy Coated Ductile Iron; Handle Material ASTM A126 Grey Iron; Pressure Rating 250 PSI (Water), 200 PSI (Fire Protection); Inclusions/Features Delrin Thrust Bearing, Stainless Steel Hardware, Elliptical Bolt Hole, Replaceable O-Ring; Exclusions Accessory, Flat Gasket; Application Water Supply; Applicable Standard UL 262, ULC, FM 1120/1130, AWWA C515, NSF/ANSI 61G/372, ISO 9001; Lead-Free